Продукти за павета 702 s2 кейс с ключ (6)

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds For optimum adhesion, clean contamination and other lubricants Operating temperature:-35 °C → +450 °C Press-fit:µ = 0.05, no chatter Four-ball test rig (welding load):4,200 N

Messer zum Schneiden dünner Materialien. Der Überschnitt ist kleiner bzw. die Schiebekräfte grösser als beim Z16. Als Oszilliermesser kommen die Vorteile dieses Messers zur Geltung. Verwendung: EOT, POT 0.63 mm. Empfohlene Materialien: Faltkarton; 100g - 1500g Dichtungsmaterial Schaumstoff Leder Max. Schnitttiefe: 12 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 0.47 x Tm Nachschnitt: ohne Hersteller Artikel-Nr.: 3910307 Artikel-Nr:20310016 Hersteller:Zünd Hersteller-Nr:3910307

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants. Operating temperature:-25 °C → +125 °C Press-fit:µ = 0.14, no chatter Four-ball test rig (welding load):5,000 N Thread friction (M10/8,8):µ total = 0.09

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Oszilliermesser mit kleinem Vorschnitt. Wie Z41, jedoch länger. Verwendung: EOT, POT 0.63 mm. Empfohlene Materialien: Leder Wellpappe Gewebe; Textile Filz Schaumstoff Max. Schnitttiefe: 13.2 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 0.8 + 0.18 x Tm Nachschnitt: 1.20 mm Hersteller Artikel-Nr.: 5002488 Artikel-Nr:20310453 Hersteller:Zünd Hersteller-Nr:5002488

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free Operating temperature:-5 °C → +80 °C Density (20 °C):1.06 g/ml Viscosity (40 °C):20 - 24 mm²/s